Palmer WT PB 40 Multi Power Supply

52

Multi Power Supply for Effect Pedals

  • Powerbar power supply with 8 outputs for Palmer Pedalbay 40
  • Can be completely and unobtrusively integrated into the pedal board by simply replacing the first crossbar
  • Output 1-6: 9V DC @ max. 300 mA (individually isolated)
  • Output 7-8: 9/12 / 18V DC @ max. 500 mA (individually isolated)
  • Max. Total power: 2000 mA
  • Power supply with a 12 V DC power adapter (included in delivery)
  • Dimensions (W x D x H): 450 x 50 x 24 mm
  • Weight: 650 g
  • Incldues cable from 5.5 x 2.1 mm coaxial connector to 5.5 x 2.1 mm coaxial connector: 5 pieces with a length of 16 cm and 9 pieces with a length of 60 cm
In catalogo dal Dicembre 2019
Numero di articolo 480343
Unità incluse 1 Pezzo
DC/AC current DC
Output current in mA 2000 mA
9 V Yes
12 V Yes
18 V Yes
Multi-output power supply Yes
€ 129
Spedizione gratuita, incl. IVA
disponibile
disponibile

Questo prodotto è disponibile e può essere spedito immediatamente.

Informazioni sulla spedizione
1

52 Valutazioni dei clienti

4.7 / 5

Devi effettuare il login per poter lasciare una recensione.

IMPORTANTE: Per evitare di inserire informazioni per sentito dire, non complete o sbagliate, permettiamo di dare un giudizio delle attrezzature solo ai nostri clienti che hanno comprato la merce direttamente da noi.

Dopo il Login trovi nella tua area cliente troverete sotto la sezione "Giudica i prodotti" tutti gli articoli ai quali potrete dare un giudizio

Qualità

29 Recensioni

F
Required for Palmer pedalboards
Fabiosan 02.03.2024
An indispensable power bay for Palmer pedalboards, easy to install and can be placed in place of any horizontal bar. Excellent supply of connecting cables.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
P
Description not true
Philippe19670 13.12.2021
This is not correct and not honest as the pedal board length is 45 cm and the WT PB 40 is 45,5 cm so I had to adjust by drilling new hole as the pedal board frame was deformed, (longer at the top and shorter at the bottom), so the screw hole were not in place anymore.

NO it cannot be completely and unobtrusively integrated into the pedal board by simply replacing the first crossbar as they say.
Qualità
3
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
DM
Better than described
Dave McK 14.11.2020
This is a nice power supply that sits beautifully in my pedal rack and delivers plenty of power. I had a custom pedal that required a little more than the rated amperage and it works without a problem. The original power supply for the custom pedal was a constant nuisance, so this has worked better than expected for me.
Qualità
0
0
Segnala un abuso

Segnala un abuso

google translate gb
Sfortunatamente si è verificato un errore, La preghiamo di riprovare più tardi.
B
Light and strong
Benan 21.04.2021
I bought this one with the Harley Benton SpaceShip 40 bundle to power a Boss RC500 looper, a tc-e quintessence and a ehx oceans 11.

The fit in the pedalboard is REALLY tight. I had to unscrew not only the bar I had to remove but also the next one to allow me to force it a bit into place (no bending the pedalboard). Screwed right back ok.
Power cables of different length, I like it.

Powers correctly my pedals, no umm, invisible power solution. Thing that they could do better is the installation instructions. Like for the protective plate. It's a bit lacking and therefore confusing. (Its just screws so you can't really damage it but would have been faster with proper instructions)
Qualità
0
0
Segnala un abuso

Segnala un abuso