Doepfer A-148 Dual Sample And Hold

46

Euro Rack Module

  • Dual Sample & Hold
  • Two separate sample/hold circuits
  • Euro rack format
  • Power requirements: +20 mA (+12V) / -20 mA (-12V)
  • Width: 4 HP / 20.0 mm
  • Depth: 30 mm (measured from the rear of the front panel)
Disponível desde Junho 2005
número de artigo 182936
unidade de venda 1 peça(s)
Width 4 TE / HP
€ 64
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Segunda, 29.04.
1

46 Avaliações de clientes

4.7 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

manuseio

características

som

acabamento

20 Críticas

k
Love it
knickar 24.07.2022
Since I am doing some generative and random based music, this module is very useful.
manuseio
características
som
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
Z
A versatile little module
Zoë 10.03.2014
This module contains two identical parts, either of which can be set to either sample and hold or track and hold by moving its jumper. By default, you get one of each.

I'm not aware of just how much sample and hold units can vary in quality, although this pair certainly does the job. When it comes to features, Doepfer comes out on top again, as track and hold units are certainly rarer.

Using (A-118) white noise as a sample input and an LFO as a trigger input, you can create the random LFO setting found on classic monosynths like the Roland SH and Yamaha CS ranges. Being modular, you can also put it to other creative uses. For instance, it can emulate the sound of a low fidelity digital sampler, akin to bitcrushing, with a sample rate you can dynamically tweak.

This is one of those small, basic utility modules (along with the A-114 ring modulator and A-150 voltage controlled switch) that are about as useful as you are imaginative. They can greatly expand the possibilities of your A-100 just as long as you can use them creatively.
3
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Hidden arpeggiator
Anónimo 26.10.2016
Most of us will think of a sample and hold in terms of random generated sounds from bleeps to gurgling streams but it can also be used to generate melodies and arpeggios.

I connect an lfo set to square wave as a trigger for sampling.
I use another lfo set to sine wave as sample input, play around with the frequency. The output is fed to either the cv in of a vco or the fm in of a vco if you have one. Play around with these as they give different effects. The key is to experiment with the lfo sample rate which takes you from arpeggio like patterns to random patterns. That's just with one of the sample and hold sections and we have two to play with and the only limit there is your imagination. Thanks Doepfer!
2
1
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
I love it
Anónimo 10.04.2022
Interesting modulo, with 2 posibilities: s&h and t&h
manuseio
características
som
acabamento
0
0
Reportar a crítica

Reportar a crítica