Rean NYS 322

171

DIN Connector

  • 5-Pin
  • With metal sleeve
  • Maximum cable diameter: 5 mm
  • Made by Rean (registered Trademark of Neutrik AG)
número de artigo 121360
unidade de venda 1 peça(s)
Build In No
Plug DIN 5-pol. (MIDI) male
€ 1,62
IVA incluído, € 20 de portes de envio adicionais
Desconto de quantidade
Preço unitário Poupará Montante
€ 1,62 1
€ 1,55 4,3% 20
€ 1,49 8,0% 50
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Segunda, 29.04.
1

171 Avaliações de clientes

4.7 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

59 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
MM
The only decent MIDI plug I could find
Mike MK 06.04.2020
I'm using these connectors for making my own MIDI cables in my quite specific studio setup.

Pros:
- excellent price to quality ratio
- sturdy with proper strain relief
- metal casing
- easy to solder
- fit well in all MIDI sockets

Cons: none

I've been using these for quite some years now. Some users might find it irrelevant but I like how these plugs slide into all MIDI sockets on all of my devices, while I hade some ready made cables that had to be plugged in and out with decent force.

While not a con, I'd like to see more variants of this connector, e.g. 90 degrees angle, etc.
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
High quality connector
Anónimo 12.03.2014
I use this one for an old Philcorda which has an 5 pin audio output. I also used cheaper ones but i really prefer this one. First of all the metal case is really stable and solid. Then the cable relief and rubber break protection is also very solid. At least the connection pins inside are very easy to solder. The solder almost sticks to the pins. This is a mess with the cheap ones. Espacially becaus there are five of the pin connectors and they´re very small. So if you want a long live, easy to solder connctor invest the more bucks ans go for the neutrik! I only used it for audioconnections. Don´t know how it works for Midi.
acabamento
2
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
A
Easy to solder
AdrianoGominho 13.02.2021
Using these to make my own midi cables. These are easy to solder and seem sufficiently robust to withstand frequent handling.

The fitting between the metal case and the plastic core is very tight. On one connector the case was slightly ovalized, not that this could be visible to the naked eye, but enough to prevent the plastic core to slide to its position. A gentle press on the metal opening with a suitable sized drill was enough to sort this out, but if I had not the proper tools I would be stuck with an unusable item.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
P
good
Pjanoz 22.10.2018
Its very nice quality but Ive had some where the rubber protection cracked.
acabamento
1
0
Reportar a crítica

Reportar a crítica