Doepfer A-148 Dual Sample And Hold

46

Euro Rack Module

  • Dual Sample & Hold
  • Two separate sample/hold circuits
  • Euro rack format
  • Power requirements: +20 mA (+12V) / -20 mA (-12V)
  • Width: 4 HP / 20.0 mm
  • Depth: 30 mm (measured from the rear of the front panel)
Tillgänglig sedan Juni 2005
Artikelnummer 182936
försäljningsenhet 1 Styck
Width 4 TE / HP
759 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Beräknat utskeppningsdatum till Måndag, 29.04.
1

46 Kundbetyg

4.7 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

drift

funktioner

ljud

hantverkskvalitet

20 Recensioner

SJ
Good basic S&H
Samantha Jane 07.08.2022
Nice basic S&H - you get 2 of them in a compact easy to use unit. Only issue I have was one of the sockets was a little loose on arrival but easy to fix. Excellent value for money.
drift
funktioner
ljud
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
Z
A versatile little module
Zoë 10.03.2014
This module contains two identical parts, either of which can be set to either sample and hold or track and hold by moving its jumper. By default, you get one of each.

I'm not aware of just how much sample and hold units can vary in quality, although this pair certainly does the job. When it comes to features, Doepfer comes out on top again, as track and hold units are certainly rarer.

Using (A-118) white noise as a sample input and an LFO as a trigger input, you can create the random LFO setting found on classic monosynths like the Roland SH and Yamaha CS ranges. Being modular, you can also put it to other creative uses. For instance, it can emulate the sound of a low fidelity digital sampler, akin to bitcrushing, with a sample rate you can dynamically tweak.

This is one of those small, basic utility modules (along with the A-114 ring modulator and A-150 voltage controlled switch) that are about as useful as you are imaginative. They can greatly expand the possibilities of your A-100 just as long as you can use them creatively.
3
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
A
Hidden arpeggiator
Anonym 26.10.2016
Most of us will think of a sample and hold in terms of random generated sounds from bleeps to gurgling streams but it can also be used to generate melodies and arpeggios.

I connect an lfo set to square wave as a trigger for sampling.
I use another lfo set to sine wave as sample input, play around with the frequency. The output is fed to either the cv in of a vco or the fm in of a vco if you have one. Play around with these as they give different effects. The key is to experiment with the lfo sample rate which takes you from arpeggio like patterns to random patterns. That's just with one of the sample and hold sections and we have two to play with and the only limit there is your imagination. Thanks Doepfer!
2
1
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
A
I love it
Anonym 10.04.2022
Interesting modulo, with 2 posibilities: s&h and t&h
drift
funktioner
ljud
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension