Roadworx 4120B

27

Keyboard Stand

  • For 4 keyboards
  • 4 Support levels freely adjustable in height and inclination
  • With hand wheels
  • Interior width: 120 cm
  • Holder length: 69.5 cm (level 1), 45 cm (levels 2, 3 and 4)
  • Max. load capacity: 10 kg
  • Max. load capacity on lowest level: 35 kg
  • Total height: 139 cm
  • Weight: 16 kg
  • Colour: Black
Tillgänglig sedan Februari 2023
Artikelnummer 547968
försäljningsenhet 1 Styck
Keyboard Supports 4
1 529 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Leverans beräknas mellan Måndag, 6.05. och Tisdag, 7.05.
1

27 Kundbetyg

4.5 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

funktion

stabilitet

hantverkskvalitet

20 Recensioner

C
Csiken 23.04.2024
Very priceworth.
Downside is to find accessories
stabilitet
hantverkskvalitet
funktion
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
C
Great
Cadian 17.11.2023
Very sturdy stand lots of space for synths, only issue is the brackets that come with it cannot be taken off without dismantling. However the jaspers brackets fit perfectly and they can be put on without disassembling. I found it easy to build but the instructions could be much better. For the price point definitely 5 stars
stabilitet
hantverkskvalitet
funktion
1
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
l
Excellent
lhckr 28.02.2023
This stand is a godsend for the price and the quality construction, fairly easy to mount and very stable at full load. It finally consolidated my setup in one place.
stabilitet
hantverkskvalitet
funktion
1
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
M
Not stable at all. Very little adjustment.
Martin9392 08.01.2024
Complex to set up and has a tendency to rotate under the slightest pressure. I have a M Audio Keystation 88 which barely fits widthways. A Korg Krome a Roland Gaia and a Modal Cobalt8X. The latter is relatively heavy and has a curved front to the underside. The only way possible to keeep this on the Roadworx 4120B is to put velcro strips on the supports and under the keyboard. otherwise it slips off immediately. That in itself is more of an issue with the Modal but this stand won't hold it without assistance.

Secondly I can put this on and tighten the 4 wheels for this row. (2 on the bar and 2 on the supports) as tight as I can and I have strong hands and in 10 minutes the Modal will be pointing downwards. The poles and supports may be strong in themselves but the brackets are next to useless.

Finally you cannot set this and reach synth controls. One of the sets of support is much longer. however 80% of that length goes back behind the pole. In fact the front part of this pair of supports is shorter than the others. Unfortunately you have to use this on the bottom rung as it is too deep to go anywhere else unless you want two metal rods sticking into your wall.

I found a half solution and that was to invert the long poles so they stick a long way forward and use velcro to hold on my keystation. Its not a deep keyboard but just too wide to fit between the poles on the normal brackets. The downside to this is with all the weight forward - the inadequate brackets let it constantly tilt forward especially if I play above pianissimo.

If you have a selection of small light keyboards - this would do the job (maybe). if you have anything substantial - look elsewhere.
stabilitet
hantverkskvalitet
funktion
1
0
Anmäl recension

Anmäl recension