Sonarworks SoundID Ref Measurement Micro

58

Measurement Microphone

  • Pre-polarised electret condenser capsule
  • Frequency range: 20 - 20,000 Hz with measurement protocol
  • Polar pattern: omnidirectional
  • Sensitivity: 14mV / Pa
  • Inherent noise: 24 dB
  • Signal-to-noise ratio: 70 dB
  • Dynamic range: 106dB
  • Max. sound pressure level: 132 dB
  • Requires 48 V phantom power
  • Connection: XLR 3-pin
  • Calibration file for 30° off-axis measurement in native Sonarworks format for use with SoundID Reference software
  • Calibration file for 0° on-axis measurements in TXT format
  • 21-Day trial version of Sonarworks SoundID Reference available online
Tillgänglig sedan Mars 2021
Artikelnummer 515342
försäljningsenhet 1 Styck
999 kr
inklusive moms, 99 kr frakt tillkommer
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
Beräknat utskeppningsdatum till Måndag, 29.04.
1

58 Kundbetyg

4.9 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

funktioner

hantverkskvalitet

42 Recensioner

t
Great for bad acoustics
trulle 06.09.2023
Make such a great impact on my setups both at home and in studio. None of the rooms that I work in are professionally treated. To ensure I mix with a flat sounding monitoring Sonarworks really does the job! Using a genelec 8040 pair in my main studio and since they have a lot of bass, sonarworks really compensates for this so I have a flat repsonse. I also love the function where you can boost the Bass and the Tilt(which are for the highs). Its awesome for making it sound killer in a producing/writing phase.
Just be caruful to not bounce your mixes with the plugin on, I've almost learned to bypass it everytime now!:)

and also you need to buy the sonarworks software to use this mic ofc!
funktioner
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
s
Excellent results with a little work
samxu 10.11.2021
This software does not negate the need for some room treatment at least in my case. My experience was also confounded by balancing in a sub woofer as well as measuring the mains. I'm using two Focal shape twins and a Focal Sub 6. My room is not perfectly treated but has some treatment including some bass traps. Deviations from 300hz to 20Khz were less than 3db. The major deviations were from 50hz to 100hz. One configuration when measured produced a 12db hump in the lower region. This software did not do well with taming that hump. Once I got the bottom end to within 6db of flat the software did a wonderful job of producing a very true sound in the room. The speakers and this software are all new and were installed at about the same time. The final result was a better, flatter sound than I have ever experienced in this room and is very trustworthy. I am hearing subtleties that I have never heard before and am going through old mixes making some real impactful changes. The room measurement and the VST plugin work perfectly which is what I needed most. I am working with support to get the APO working if possible. Regardless of the functioning of the APO, I gave this software 5 stars because using the VST in Cubase and Wavelab have made a significant positive change in my mixing and mastering abilities.
funktioner
hantverkskvalitet
7
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
A
The story is about idea of the measurement concept.
AlphaDo.ch 05.01.2022
This story is about idea. Idea about Measurement concept. Of course, each studio monitors, each room acoustics are different. Probable you should measure it to get a best possible result. This measurement option is good, but it needs a lot of improvements.

I would say, that would be a great solution for music listeners and producers if this concept works without PC or Mac. If some hardware option, for example some small box with programmable profiles (2 profiles for headphones and 2 for studio monitors) could be placed behind the sound interface. Otherwise you should always switch profiles and drivers.

When I master music, I use 2 pairs of headphones and monitors. For example, when using the profile for first headphones, the other headphones or monitors are practically unusable. In fact, after all tests I turned it off. Currently I only use it in special situations.
funktioner
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
CJ
The only one you need
Chief Janez 17.02.2022
Since this is an official Sonarworks product you can't go wrong with it. The microphone and the packaging are of the highest quality, would recommend.
funktioner
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension