Doepfer A-106-1 Xtreme Filter (MS20)

Näytä käännös

MS20 Low/High Pass Filter

MS20 filter clone
Width: 14 HP / 70.8 mm
Depth: 40 mm (measured from the back of the front panel)
Power consumption: +30 mA (+12 V) / -20 mA (-12 V)

30 30 päivän palautusoikeus

3 3 vuoden Thomann-takuu

Myynnissä vuodesta Kesäkuu 2005

Tuotenumero 178322

Myyntierä 1 kappaletta

Width 14 TE / HP

Näytä vaihtoehdot tästä tuotteesta

Doepfer A-106-1 Xtreme Filter (MS20)

Doepfer A-106 Xtreme Filter (MS20) MS20 Low/High Pass Filter * MS20 filter clone * Width: 14 HP / 70.8 mm * Depth: 40 mm...

119 €

tuotteeseen

122

Doepfer A-124 Wasp Filter SE

Doepfer A-124 Wasp Filter SE Wasp Filter * Special edition * Special 12 dB multimode filter * Circuit technology of the ...

88 €

tuotteeseen

Doepfer A-160-2 Clock Divider II

Doepfer A-160-2 Clock Divider II Frequency Divider * For clock/trigger/gate signals * Width: 4 TE/ 4 HP / 20 mm...

99 €

tuotteeseen

Doepfer A-138s Mini Stereo Mixer

Doepfer A-138s Mini Stereo Mixer Mini Stereo Mixer * 4-in-2 mix module in Eurorack format * Four inputs with attenuator ...

79 €

tuotteeseen

Doepfer A-138M

Doepfer A-138M Matrix Mixer * With 4 rows and 4 columns * Unipolar / Bipolar mode switchable on each column * Suitable f...

144 €

tuotteeseen

117

Doepfer A-180-2 Multiples

Doepfer A-180-2 Multiples Passive Multi-Port Distributor * 8x Interconnected jacks * Sockets are divided into 2x quadrup...

35 €

tuotteeseen

Doepfer A-156

Doepfer A-156 Dual Quantiser The A-156 Module is a dual control voltage quantiser. A quantiser converts a continuous inp...

119 €

tuotteeseen

Doepfer A-151

Doepfer A-151 Quad Sequential Switch Module * Electronic 4-position rotary switch * Trigger input * Reset input * 4 Inpu...

59 €

tuotteeseen

Doepfer A-198 (Module + Manual)

Doepfer A-198 (Module + Manual) Trautonium Controller * Consists of Doepfer A-198 Module and Ribbon Controller * Ribbon ...

205 €

tuotteeseen

Doepfer A-178 Theremin

Doepfer A-178 Theremin Theremin Module * Produces variable control voltage when hand is moved around the antenna * Range...

99 €

tuotteeseen

Doepfer A-180-3 Dual Buffered Multiple

Doepfer A-180-3 Dual Buffered Multiple Synthesizer module * Double buffered 1-in-3 multiple * For buffering and duplicat...

49 €

tuotteeseen

Doepfer A-156 Vintage Edition

Doepfer A-156 Vintage Edition Dual Control Voltage Quantizer * Vintage edition with black front plate * Converts a conti...

129 €

tuotteeseen

119 €

Sis. ALV. Ei sisällä 12 € rahtikulua

Arvioitu toimituspäivä Maanantai, 13.05. - Tiistai, 14.05.

Myyntisijoitus

kategoriassa Filtterimoduulit

23 Asiakkaiden arviot

5 17 Asiakkaat 4 4 Asiakkaat 3 2 Asiakkaat 2 0 Asiakkaat 1 0 Asiakkaat

4.7 / 5

Käyttö

Ominaisuudet

Ääni

Työnjälki

Arvosteluohjeet

13 Arvostelut

Näytä käännös

Näytä alkuperäinen

Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.

Not a straight MS20 clone - but awesome none the less

Martyn Q. 01.10.2015

I'll start by saying - this is *NOT* A STRAIGHT MS20 CLONE. To actually emulate the MS20 filter section you would need two of these patched in series - if you are purchasing for that MS20 sound bear that in mind, treat this as a completely different beast.
Now having said what this module isn't, I'll say what it is. Quirky, unusual, gnarly, crazy, raspy, openly-patchable, characterful - the list is endless. This is not a go-to bread and butter filter - take a look at the a106-5 sem filter if thats what you are after - but what it does, it does incredibly well. Balancing the input gain against the resonance and clipping levels can yield some incredible sounds - rasping brasses are a speciality for it. I also love using for drones as the deep lowpass with clipping is great when you patch out the resonance feedback path (I like using a189-1 vc bit mangler and a199 spring reverb on it). The filter responses are adjustable with trimmers on the board which is useful.
You wont find yourself using this on every patch, but it'll add so much to those weird and wonderful distorted sounds that you wont regret the investment.

Raportoi ongelmasta

Uskotko, että tämä arvostelu on epätarkka tai hyväksymätön jostain syystä? Ole hyvä ja kirjoita syy tekstikenttään ja – jos mahdollista – anna mukaan sähköpostiosoitteesi mahdollisia kysymyksiämme varten.

Näytä käännös

Näytä alkuperäinen

Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.

The great sound of the MS-20 filter for your modular

JohnD 18.06.2013

It's a very characteristic filter that can scream, but can sound quite mellow when tamed. One thing to bear mind is that it can be a bit confusing getting this filter to act like a standard low pass filter. This is because the low pass filter is normalled to the high pass filter i.e the signal goes through the low pass filter to the high pass filter. In principle you can set the high pass to zero (12 o'clock on the polarizer control) and the filter will just act as a standard low pass filter. In practice it is quite hard to hit the zero mark on the high pass filter and you get some of that going into the signal, which can dramatically change the sound of the low pass filter at low frequency settings. The easy way around that is to just put an unconnected jack plug into the high pass in. This will then completely bypass the high pass filter and the filter will act as a conventional low pass filter. That was the most confusing thing I found when trying this filter for the first time. Once you've sussed that out it's a great sounding filter with lots of character.

This filter is a must for anyone with a eurorack modular.

Raportoi ongelmasta

Näytä käännös

Näytä alkuperäinen

Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.

A screaming monster once you feed it well!

Tuntematon 11.01.2016

This has become one of my favourite filters. It definitely has that MS20 character, but, as is usual with Doepfer, goes much further. Some folks complain that it doesn't sound 'xtreme' enough, but this is all down to incorrect gain staging. That's what the gain input attenuator is for! I have found that it works best when set around 1 (out of 10). Crank the resonance past 5-6 and it turns into a musical screaming beast! There's a jumper on the back to turn HP input polarizer into a regular attenuator. I prefer this mode as you can easily turn off HP input without requiring dummy cables. With 3CV inputs and a feedback path what's not to love!

Raportoi ongelmasta

Näytä käännös

Näytä alkuperäinen

Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.

Goo, quiet versatile and cheap filer

Maxgr 01.08.2017

very nice filer, even if it does not scream as the original ms20, it still sounds very nice
Thomann order to delivery delays are still difficult to be beat!! Well done Team!

Raportoi ongelmasta

Lue kaikki arvostelut

Doepfer A-106-1 Xtreme Filter (MS20)

MS20 Low/High Pass Filter

23 Asiakkaiden arviot

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

13 Arvostelut

Smart Navigator

Viimeksi katsotut tuotteet

Osta ja maksa turvallisesti

Etusi

Palvelu

Paras mahdollinen ostokokemus!

Doepfer A-106-1 Xtreme Filter (MS20)

MS20 Low/High Pass Filter

Lisävarusteet ja yhteensopivat tuotteet

23 Asiakkaiden arviot

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

13 Arvostelut

Vertaile vaihtoehtoa

Smart Navigator