Mojotone ST Standard Solderless Harness

15

Solderless Pre-Wired Electronics Replacement Set for Electric Guitar

  • Suitable for ST-style models with 3 single coil pickups
  • Pre-wired electronics kit with the highest quality components, providing a significant improvement over standard electronics
  • Solderless plug-in wire connector for quick installation and easy pickup changing
  • The treble bleed circuit prevents treble loss when the volume control is turned down
  • 1 Volume control, 1 tone control (neck) and 1 tone control (middle/bridge)
  • 5-Way switch, switch positions: bridge / bridge and middle / middle / middle and neck / neck
  • Incl. 3 CTS 250k custom split-shaft potentiometers (9.5 mm thread length), CRL 5-way switch, Switchcraft mono input jack, .047µf capacitor
  • Made in USA
Myynnissä vuodesta Kesäkuu 2021
Tuotenumero 516005
Myyntierä 1 kappaletta
Design Normal
Resistance Value 250 kOhms
Characteristic Curve Logarithmic
Thread Length 6,4 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
Type Switcher
Colour Chrome
Näytä enemmän
119 €
Sis. ALV. Ei sisällä 12 € rahtikulua
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu toimituspäivä Maanantai, 6.05. - Tiistai, 7.05.
1

15 Asiakkaiden arviot

4.9 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Työnjälki

11 Arvostelut

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
K
Best aged instrument upgrade?
Keltsu 21.09.2022
I bought this set to replace 27-year old MIJ stratocaster Fujigen made electronics. I really like the sound of original ceramic pickups in the guitar and do not want to mess in any way with the aged detail they have, nor the guitar in general and that is why I chose the solderless harness. After installing this set I started playing and I immediately noticed the remarkable clarity and balance which had arrived. I would say the sound of the pickups are much more "alive" now. Never could have guessed just electronics can make this much of a difference! Also, of course all the crackling of the knobs is gone. And tone & volume knobs are now much more responsible and stable & the "feel of an expensive system" is surely here. Quality is american handmade, so made in detail as they promise. I'm sure I can go another 27 yrs with this setup :D
If you already like you guitar sound, but want to polish it more and get rid of the difficulties what old electronics bring, this is the best possible upgrade hands down. -Nothing is missing, but brought back up front.
Työnjälki
3
1
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
H
Good quality wiring kit
Hammer2021 27.02.2024
A nice upgrade wiring kit that's easy to install, and allows for easy swapping of pickups without needing a soldering iron.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate gb
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
t
Woke up my strat
tommyj 24.04.2024
I have an old Peavy strat that was suffering from age...lots of crackling and noise. This fit right in and transformed the guitar. Excellent result.
Työnjälki
0
0
Raportoi ongelmasta

Raportoi ongelmasta

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
W
lötfreies Elektronik-Austauschset
Werner_123 10.02.2022
Im Rahmen der Erneuerung der Single Coils meiner Fender Stratocaster, hatte ich mich entschlossen, auch den 5 Wege-Schalter, die Mono-Eingangsbuchse sowie die Potentiometer zu erneuern. Ich bin zwar des Lötens mächtig, bin aber bei meiner Suche bei Thomann auf das lötfreie Austauschset von Mojotone gestoßen und habe dieses dann umgehend bestellt, um mir den Einbau bzw. Austausch so einfach wie möglich zu gestalten. Einfach ist das passende Stichwort, der Einbau gestaltete sich wirklich sehr einfach. Das Verdrahtungsschema liegt der Sendung bei, sodass die Positionierung der Single Coil-Verdrahtung und der Eingangsbuchsen-Verdrahtung, unter der Beachtung der Polarität ( Hot and Ground), idiotensicher ist. Bei den flexiblen Kabeln der Single-Coils sollten die abisolierten Kabelenden mit Lötkolben und Lötzinn verfestigt werden, um das Stecken in die Klemmen zu vereinfachen. Die gesamte Aktion dauert ca. 1 Stunde, inkl. Saiten runternehmen Pickguard abschrauben, Set einbauen und alles wieder in spielbereiten Zustand zu versetzen. Von meiner Seite kann ich nur sagen: Daumen hoch, sehr empfehlenswert. Auch klanglich keinerlei Beeinträchtigung, im Gegenteil, ich bin der Meinung, der Sound ist deutlich besser.
Työnjälki
4
0
Raportoi ongelmasta

Raportoi ongelmasta