Tech 21 SansAmp RBI B-Stock

9
B-stock täydellä takuulla
Palautustuote, jossa saattaa olla pieniä käytönjälkiä.

Bass Preamp

Bass Preamp and Recording Amp - the rack version of Bass Driver D.I. and a little more

Like the little brother, the SansAmp RBI provides a vast range of traditional and modern Bassampsounds, including pushing overdrive sounds that you would not expect from a bass preamp. Find several useful presets like SVT®-style, Bassman®-style, Kings X-Style, and Crimson-style (to name just a few) in the RBI's users manual - to get you started immediately.

Most of the parameters are identical to those of the SansAmp Bass Driver D.I.:

Drive and Presence we need not explain here. Blend allows stepless transition between the dry signal and the SansAmp tube amp emulation. With the active bass and treble controls the respective frequency band can be boost or cut by 12 dB.

Key features of the SansAmp RBI:

The SansAmp RBI has a mid controller and one level pot for the XLR and jack output each in order to provide an optimal signal in parallel to both the bass amplifier on stage as well as the PA system. The integrated effects loop can be toggled between serial and parallel operation with the Mix 50/50 - switch button. The "uneffected" XLR and TRS outputs provide a dry signal for connection to two RBIs or one RBI with another bass amp. Last but not least the footswitch input for remote control of the RBI and the Foot Switch output to hook up multiple RBIs.

With the SansAmp RBI you have a whole truck-load of bass-amp-sounds in a single 19" housing. If you are looking for a substantial sound foundation you will no longer need heavy equipment in the future.

  • In any studio in the world with the RBI in hand luggage you are ready to go on the spot. Enter the console, adjust sound, done!
  • On live events, the SansAmp RBI can be connected to a Bass amp with box (e.g. TECH-21 Bass PowerWedge 60) and the P.A. system in parallel.

For those who need 2 channels: The remote control of the RBI can be coupled with another RBI. Who prefers a programmable preamp should take a look at the SansAmp PSA-1, which was not only developed for the guitar. The PSA-1 already includes 10 pre-programmed Bass presets and 49 additional program slots are available for free assignement.

  • Extended rack version of the Bass Driver D.I.
  • Parallel/serial switchable effects loop
  • Adjustable XLR and jack output
  • 19"/ 1U
Myynnissä vuodesta Tammikuu 2005
Tuotenumero 296673
Myyntierä 1 kappaletta
Design 19" / 1U
Tubes No
Amp Modeling No
Integrated Effects No
Headphone Output No
Direct Out Yes
MIDI Connector(s) No
Integrated Expression Pedal No
Connections for Pedals or Switches Yes
Aux Input Yes
Integrated Tuner No
USB Connection No
Effect Types Preamp
Saatavilla myös uusi tuote 459 €
389 €
Ilmainen toimitus sis. ALV:n
Varastossa
Varastossa

Tuotetta on varastossa ja se voidaan lähettää heti.

Tietoa lähetyksestä
Arvioitu lähetyspäivä Torstai, 2.05. mennessä

9 Asiakkaiden arviot

4.8 / 5

Sinun pitää kirjatua sisään, jotta voit arvostella tuotteita.

Huomio: jotta vältymme kuulopuheisiin, epätäydelliseen tietoon tai mainontaan perustuvia arvosteluja, niitä saa tehdä vain asiakas, joka on tuotteen meiltä ostanut.

Sisäänkirjautumisen jälkeen löydät kaikki arvosteltavat tuotteet kohdasta “Arvostele tuotteita” asiakastililtäsi.

Käyttö

Ominaisuudet

Ääni

Työnjälki

9 Arvostelut

google translate de
Valitettavasti tapahtui virhe. Ole hyvä ja yritä uudelleen.
DM
Genau das, was ich gesucht habe
Deine Mudder 04.04.2013
Für meinen Sound-Geschmack genau das was ich gesucht habe. Habe meinen Bass-Sound lange mit Bodentretern angezerrt, war damit aber immer nur für eine gewisse Zeit zufrieden, da ich eigentlich nie erreicht habe, was ich wirklich im Sinn hatte.
Mit dem SansAmp musste ich nur wenig an Rädchen drehen und herumprobieren, um meinen Sound zu finden.
Ich habe viele Meinungen gelesen, die den Heavy-Sound des gerätes zwar mögen, aber nicht so gut damit klar kommen, dass der Mitten-Regler bei ziemlich genau 1.000Hz greift. Zugegeben, das ist schon etwas speziell, hat mich vor dem Kauf auch etwas zögern lassen, jedoch gefällt mir das letzten Endes sogar ganz gut.
Ich betreibe das Gerät über den Effektweg meines HA5500. So viel ich gelesen habe, würden das einige Leute anders machen, aber es ist eine Möglichkeit und mir gefällt das Ergebnis gut. Somit ist auch der EQ vom HA5500 nicht ganz aus der Welt, falls mir eines Tages die Mitten bei 1.000Hz des SansAmp nicht mehr so geeignet vorkommen würden.

Einen Stern bei der Verarbeitung habe ich abgezogen, da sich die Poty-Knöpchen recht leicht drehen lassen. Das ist zwar kein Problem, aber für mein persönliches haptisches Feeling entsteht ein stabilerer Eindruck, wenn die Drehregler etwas mehr Widerstand aufweisen. Ich habe sonst das Gefühl, zu leicht versehentlich etwas zu verstellen.
Käyttö
Ominaisuudet
Ääni
Työnjälki
3
1
Raportoi ongelmasta

Raportoi ongelmasta