myVolts Ripcord 9V DC

46

Voltage converter and adapter cable

  • Supplies synthesizers, effect devices, MIDI equipment and numerous other devices with power via USB port, power bank or USB power supply
  • 9 V DC, 1 A (1000 mA)
  • Polarity: Centre positive
  • Output: 5.5 mm barrel connector, 2.1 - 2.5 mm inside
  • Input: USB-A
  • Cable length: 145 cm

Suitable for:

  • Arturia Keystep
  • Arturia Keylab series
  • Empress Super Delay
  • Moog Moogerfooger pedals
  • Kenton Pro Solo MKII
  • Kenton Thru 5
  • Critter & Guitari Organelle (M), and more
katalógusunkba bekerült: Június 2020
Termékszám 483685
mennyiségi egység 1 darab
DC/AC current DC
Output current in mA 1000 mA
9 V Yes
12 V No
18 V No
Secondary voltage No
Multi-output power supply No
Secondary Voltage 9 V
AC/DC DC
Mutass többet
8 899 ft
ÁFÁ-val, plusz 6 900 ft szállítási költség
Azonnal szállítható
Azonnal szállítható

A termék raktáron van és azonnal szállítható

Szállítással kapcsolatos tájékoztató
Szállítás megközelítőleg Kedd, 7.05. és Szerda, 8.05. közt.
1

46 Ügyfelek értékelései

4.7 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

kivitelezés

29 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
Z
ZZloop 25.06.2023
This is a pretty good solution for powering Korg Volca. For Volcas you also have to purchase this - myVolts Crazy Chain VAR1- or the 5way splitter - because Volcas have smaller input power jack.

Don't expect this to be without noise when powering 2 or more devices. Every time you chain more devices to a power adapter you will get some kind of trouble. Expensive adapters doesn't mean it's noiseless.

It powers one Volca without any hum or noise but after connecting another one it starts to be noisy. You need a ground loop filter or something on the audio line.
Actually this filter should be included with this product!

The chaining doesn't look good on volcas. The Crazy Chain cables are short and are all visible on top. Also they get in your way sometimes when you use your synth.
The make is good quality and precise. The chain cables fit perfectly.

I give it 3 starts. It's useful because of USB but the price is high considering you have to buy Crazy Chain cables with it and there is no solution for noise when chaining several devices.

- Crazy Chain cables are too short
- No added ground loop filter for audio line (I think everyone needs it and should be included)
kivitelezés
2
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
G
Tired of changing batteries
GARCON 21.10.2022
I can't remember if this is for Volcas or Boutiques (because I bought both) but they are great. I was running battery chargers on a constant basis and often leaving a Boutique or Volca out just because I was lazy about changing batteries.

This is a good solution and so far no problems such as hum. Quality seems good too.
kivitelezés
1
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
c
Lovely product
chocobloc 06.09.2021
You probably need to widen the pin hole to fit it with the Volcas. In my case, it powers my Nubass without any problems.
kivitelezés
0
0
Jelentem!

Jelentem!

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
b
Great for portable power
basskebab 15.02.2021
I use this to power a meeblip bass synth off a phone powerbank.
Works great and lets me add a synth that doesn't take batteries to my portable rig setup
kivitelezés
0
0
Jelentem!

Jelentem!