Thon Case Zoom LiveTrak L-8

8

Flight Case

  • Suitable for the Zoom LiveTrak L-8
  • Material: 6.8 mm Plywood, coated with phenolic resin
  • 22 x 22 mm Aluminium edges
  • 2 Small butterfly latches
  • 1 Suitcase handle with lid
  • 8 Small rounded ball corners
  • 4 Rubber feet, 25 x 15 mm
  • Foam padding
  • Unit can be operated in the bottom section
  • Place for cables in the rear
  • Outer dimensions (W x D x H): Approx. 332 x 432 x 140 mm
  • Weight: Approx. 3 kg (with unit, approx. 4.6 kg)
  • Colour: Brown
  • Made in Germany
katalógusunkba bekerült: November 2020
Termékszám 502745
mennyiségi egység 1 darab
made for Zoom
Type Case
Material 7 mm Plywood
Wheels No
Dockhouse No
Strap Handles 0
Flip Handles 0
Dimensions in mm 332 x 411 x 157
Colour Brown/Alu
Weight 3,9 kg
Options 22 x 22mm Alu Profile, 2 small Butterflys, 1 Grip, 8 small Ball Corners, 4 Rubber Feet 25 x 15 mm
External Width 332 mm
External Depth 411 mm
External Height 157 mm
Mutass többet
58 900 ft
ÁFÁ-val, plusz 6 900 ft szállítási költség
1-2 héten belül szállítható
1-2 héten belül szállítható

A termék hamarosan megérkezik raktárunkba, ezt követően rövid időn belül szállítható.

Szállítással kapcsolatos tájékoztató
1

8 Ügyfelek értékelései

4.8 / 5

A termékek értékeléséhez kérjük, jelentkezz be.

Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.

A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.

stabilitás

kezelhetőség

kivitelezés

7 Vélemények

google translate gb
Sajnos hiba történt. Kérjük, később próbálkozz újra.
M
Snug Fit - never have to worry about storage and transportation again.
MediaMill 23.05.2023
Perfect case for the Zoom LiveTrak L-8. Good sturdy construction, with plenty of foam padding to keep the mixer safe and secure - it is a snug fit and will never have to be taken out of the case once it's in (unless you're changing the batteries). Rubber feet on the underside also do a good job of keeping the case in situ.

There is a bit of space left at the back of the mixer so that you can access the SD card slot without having to take the mixer out of the case. You can also use this space for storing the likes of the power cable. That said, the space itself is small so you won't be able to fit much else, especially if you have to use an EU-UK plug adapter like myself, which just about fits.

The main area of improvement would be the quality of the butterfly latches. They are a little flimsy, but get the job done. I would have preferred if they were mounted 'upside down' so that it was easier to take the lid off the case, but that's a very minor gripe considering the overall high build quality.

In summery - sturdy construction, snug fit, will never have to worry about storage and transportation again.
stabilitás
kezelhetőség
kivitelezés
0
0
Jelentem!

Jelentem!

google translate de
Sajnos hiba történt. Kérjük, később próbálkozz újra.
V
Super stabiles Case für jeden Einsatz
Vinylschaberson 06.12.2020
Ich habe mir das Case für den mobile Einsät des Zoom LiveTrak L8 zugelegt.
Es erfüllt diese Aufgabe in jeder Hinsicht super. Es ist sehr stabil, passgenau und für den Einsatz sehr praktisch, da das Gerät drin verbleiben kann.
Hinter dem Fach für den Mixer ist Platz für einige Kabel und eine große Powerbank, die ich für viele Stunden Aufnahme dort lassen kann, da die Anschüsse und die SD-Karte zugänglich ist.
Ich verwende den Mixer aktuell hauptsächlich, um mehrspurige Aufnahmen von kleinen Ensembles und Chören zu machen, dafür habe ich immer für 2-3 Kameras entsprechende Klinkenkabel in dem Case, damit die direkt vom Mixer den Ton bekommen können (Macht die Synchronisation einfacher) und die passen damit noch ein paar Notfallbatterien super hinein
Ich gebe einen Stern Abzug, weil das Inlay des Cases auf dem Zoom kleine Kleberrückstände von den Schichten des angepassten Inlays hinterlässt und weil ich finde, dass es mit knapp 120€ (November 2020) doch recht teuer ist.
Dafür ist es aktuell zumindest bei Thomann (und wo ich vor dem Kauf noch so gesucht habe) das einzige verfügbare Case für diesen Mixer.
Ist also nur ein halber Stern abzug. Danke Thomann für das Case 😊
stabilitás
kezelhetőség
kivitelezés
1
0
Jelentem!

Jelentem!