Allparts 500k LinearTaper Push/Pull Pot

54

Linear Push/Pull Potentiometer

  • Linear 500 kΩ potentiometer
  • Push/Pull switching function
  • Knurled shaft with standard length
  • Thread height: 9.0 mm
  • Thread diameter: 9.4 mm
Produkt dostępny od Czerwiec 2016
Numer artykułu 388506
Jednostka sprzedaży 1 szt.
Design Linear Taper
Resistance Value 500 kOhms
Characteristic Curve Linear
Thread Length 10,0 mm
Tandem Poti No
Push/Push Push/Pull
Solderless No
shaft type grooved
46 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 26.04.
1

54 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

31 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Thank God for this part!!
Adrian0072 20.08.2020
I bought a Squier Bullet Mustang and thought this would not fit in the thinner Squier body, I was wrong, it fit perfectly! Nonetheless i soldered all my ground connections to the side of the pot and not the bottom. The pot turns smoothly but not too smoothly, and the push/pull works like a charm!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
alright
T&Sunborn 31.12.2019
No problems within 6 months of moderate use.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
B
has a few quirks
Belgian 03.03.2019
I used this pot on my mexican blacktop tele when upgrading the electronics.
There are a few notable things with this pot:
Pro's:
-good quality contacts for soldering
-good sound quality, especially when combined with a good capacitor
-smooth operation of the pot and the push/pull switch
Con's:
-larger than standard thread, for which I had to drill out the holes in my tele control plate to make it fit
-The grounding point is a bit small, which makes it slightly harder to solder a star point for grounding.
-the shaft is on the shorter side
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
CC
Does what it is supposed to do - a volume coil split pot
Catalin Cornea of Order 66 25.05.2020
Used it to split the coils of DiMarzio Titan pickups in an Ibanez mod I made. Very good, sturdy, reliable, worth the price.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie