Behringer DS2800

90

Signal splitter

  • 2 Inputs
  • 8 Outputs
  • 2 Audio signals to 4 separate zones or a single signal up to 8 possible
  • XLR line inputs
  • Level control and 5 segment LEDs per output
Produkt dostępny od Październik 2018
Numer artykułu 450595
Jednostka sprzedaży 1 szt.
Number Of Channels 8
Inputs 2
Outputs Per Channel 4
+48 V Phantom power No
Grd Lift Switch No
Pad Switch No
Headphone Outputs No
Design 19" / 1U
419 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny za 2-3 tygodnie
Dostępny za 2-3 tygodnie

Produkt będzie za niedługo dostępny i natychmiastowo gotowy do wysyłk.

Informacje dotyczące wysyłki
1

90 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

dźwięk

wykończenie

39 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
Ma
DS2800 a great unit
Mike at Tabor Audio 08.05.2019
I was looking for a simple mixer with eight stereo inputs and four stereo outputs. Couldn't find one anywhere until I came across the RX1602 mixer and the DS2800 splitter. They are totally quiet, no hiss or hum that I can hear.

The DS2800 can be used as a mono splitter with eight outputs or as a stereo splitter with four ouputs. This means there is no single stereo main output control, you need to operate two controls, one for left channel and one for right. My solution is to pre-set these and use the input level controls of the RX1602, which usefully have a level and balance control for each input.

The XLR connectors allow for using two (or more!) DS2800 units together, so for example with two of them, you could split the mixer output into four stereo signals.

A very useful piece of kit.
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
R
MULTIPLE AMPS.
REBUS-TAHEEM 09.03.2022
STRAIGHT FORWARD AND EASY TO USE.
dźwięk
obsługa
właściwości
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
V
It's fine
Vucko101 06.08.2023
It's fine for what it is, missing clips on XLR doesn't help with reliability.
I think there are better options out there, but this will do the job just fine.
dźwięk
obsługa
właściwości
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate es
Wystąpił błąd. Proszę spróbować później.
CB
Correcta y funcional
Cal Baster 18.02.2020
Necesitaba un producto de este tipo ya que me vi rodeado de operadores de cámara que me preguntaban donde conectarse para tener el audio de la mesa de mezclas en un evento público y yo solo tragaba saliva y disimulaba como podía, que mal trago.

Al siguiente acto de este tipo ya decidí que esto no podia volver a pasarme. Lo utilizo en modo mono o de ocho salidas. Los operadores se conectan a una de las salidas y ellos mismos se ajustan su nivel y ya me despreocupo del tema. Tiene un by-pass, pero como la mesa de audio tiene dos salidas, una de ellas se la dedico al DS2800.

Sin problema alguno. Cumple la función para la que se ha diseñado con buena relación precio calidad. Hablando de diseño, creo que se podria mejorar si fuera de tamaño 2U y que todo estuviera en el frontal, ya que si dejas la parte de los conectores accesible, los controles de volumen quedan en la parte posterior y viceversa.

En el rack no lo puedo tener ya que es un riesgo innecesario cuando se conecta gente desconocida o no, sin querer un accidente con algun cable incorrecto. Yo lo he habilitado en la parte inferior de una mesita auxiliar que tengo para esos menesteres y la distancia entre las patas se acerca mucho a las 19" Std. que mide de ancho. A disfrutarla.
0
0
Zgłoś nadużycie

Zgłoś nadużycie