Blackmagic Design MC SDI-HDMI 3G

42

Compact converter from SDI to HDMI signals

  • Supports all video standards in NTSC, PAL, 720 HD and 1080 HD
  • Supports software updates via USB-C connectionwith 17-point 3D LUT for colour calibration of screens, projectors and TVs of all types
  • With camera control functions for Blackmagic ATEM mixers
  • Supports 3G-SDI and HDMI timecode standards
  • With 3G-SDI technology and internal SDI reclocking
  • SDI video inputs: 1x for SD, HD or 3G-SDI
  • SDI video outputs: 1x loop-through output
  • HDMI output: 1x HDMI type A
  • Multirate support: Automatic detection of SD or HD
  • Power consumption: 1.6 W
  • Power supply: 4.4 - 5.25 V DC (power supply unit not included)
  • Dimensions: 77 x 56 x 25 mm
  • Weight: 150 g
Produkt dostępny od Grudzień 2020
Numer artykułu 508043
Jednostka sprzedaży 1 szt.
Input SDI
Output HDMI / SDI
275 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

42 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

jakość obrazu/dźwięku

właściwości

wykończenie

22 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
DL
Great little box -currently requires bugfix
Daniel LP 15.02.2021
This is a very sturdily built breakout box with one simple task: convert your SDI signal to HDMI. It has a USB-C port for power as well as to connect to a host PC (more on that in a sec) - though you can also order the converter with an external PSU - as well as an SDI out to send your signal to another SDI device further downstream such as an LCD monitor or EVF.

For such an inexpensive and small device, it adds a nice feature: you can upload a 3D LUT to allow you to monitor your image on set with a specific look, to judge exposure, gamma/contrast curves etc, which not all monitors or EVFs support. However, with the latest firmware (as of Feb 21), based on forum posts, it appears several of these units are "faulty" (hopefully solved with a bugfix) and do not display the image correctly with a LUT loaded - you simply get a completely white screen. (The current workaround is to simply disable the LUT and monitor the image as-is.)
obsługa
jakość obrazu/dźwięku
właściwości
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie