L
Good potentiometers
Good tone potentiometers, wanted to replace them because my guitar had mini-pots that worked not so good, even if I roll them to 0, the sound didn't change so much, probably they were broken
The main problem was that the holes in the guitar body where potentiometers are inserted were too small, I had to expand them a little with a file.
After this I soldered them, installed, and I noticed that they changed the sound, it became brighter, I can't say for sure, that's a merit of these pots, or that's because previous worked very badly
Now I can slightly roll them and will notice that the sound changed a bit, which means that you can change the tone as you want, this didn't happen with previous pots.
Don't have any complaints, I'm satisfied and can recommend them.
P.S. If someone wonders, for the volume I bought the ''Göldo Pot 500K Lin'', so I'm happy with them both
The main problem was that the holes in the guitar body where potentiometers are inserted were too small, I had to expand them a little with a file.
After this I soldered them, installed, and I noticed that they changed the sound, it became brighter, I can't say for sure, that's a merit of these pots, or that's because previous worked very badly
Now I can slightly roll them and will notice that the sound changed a bit, which means that you can change the tone as you want, this didn't happen with previous pots.
Don't have any complaints, I'm satisfied and can recommend them.
P.S. If someone wonders, for the volume I bought the ''Göldo Pot 500K Lin'', so I'm happy with them both
2
0
Zgłoś nadużycie
SS
This is good pot...
After using all kinds of pots from different brands, these are spot on.
They turn exactly the way I like, not too stiff and not too light.
Solidly constructed and they don't make crackling sounds when turning them.
I use them as good replacements and for scratch builds.
They turn exactly the way I like, not too stiff and not too light.
Solidly constructed and they don't make crackling sounds when turning them.
I use them as good replacements and for scratch builds.
1
0
Zgłoś nadużycie
EB
Can't beat it
I've been using this pot series for years and since the first set I bought, these are the only ones I've been buying and using.
They feel better than Fender pots, they are a lot cheaper and they are Japanese made, well, you can;t beat that.
They feel better than Fender pots, they are a lot cheaper and they are Japanese made, well, you can;t beat that.
0
0
Zgłoś nadużycie
A
Made in Japan - that's enough to say!
I like everything which has a stamp "Made in Japan". So that's why I was brave with this product, I purchased it without any hesitation. Although there were a few negative review about it. Honestly I have no idea why someone gave a negative feedback for this product. It was easy to solder, very massive and robust. I didn't have to afraid that I will break a solder lug or anything. Rotates super smoothly, not too loose not too tight just exactly what I like.
I purchased it for my Charvette 200, which has an HSS pickup configuration. (I don't use any tone control knob just a single volume is enough for me)
After installation I gave a quick test, worked perfectly fine, there was no noise or scratching sound. It is a really good value for money item, you won't be able to find better product for this money!
I purchased it for my Charvette 200, which has an HSS pickup configuration. (I don't use any tone control knob just a single volume is enough for me)
After installation I gave a quick test, worked perfectly fine, there was no noise or scratching sound. It is a really good value for money item, you won't be able to find better product for this money!
0
0
Zgłoś nadużycie
A
Goldo EL500 Pot - nice spare electronic parts
I use Goldo pots either to replace low quality pots onsome of my guitars, or to use on guitars built from scratch by my luthier.
Appreciations apply to both 500 and 250 k
PROS:
Good quality for the money
Fairly well built
Last fairly well in use
Good result when used correctly in conjunction with pick-ups (ie they do not induce noise or unwanted changes in sound)
CONS
None
I would recommend Goldo as a fair choice of good electronics on guitars. One of the best choices in their range of price
Appreciations apply to both 500 and 250 k
PROS:
Good quality for the money
Fairly well built
Last fairly well in use
Good result when used correctly in conjunction with pick-ups (ie they do not induce noise or unwanted changes in sound)
CONS
None
I would recommend Goldo as a fair choice of good electronics on guitars. One of the best choices in their range of price
0
0
Zgłoś nadużycie
K
400kOhm instead of 500
This pot measures 400kOhm instead of 500kOhm. It may be that these come with a +/- 20% tolerance but still, it's a very marginal pass. I also think the +/-20% tolerance should be mentioned in the product page.
0
0
Zgłoś nadużycie
B
Still working well.
I used these potentiometers when I rewired my 1982 Ibanez ES50. That was a while back and they're still working 'like new'. A good product.
0
0
Zgłoś nadużycie
Nt
Good quality replacement pot
It's a good quality replacement pot with nice taper and easy to solder
0
0
Zgłoś nadużycie
s
Great quality product for a low cost
Smooth operation, great sweep for volume control.
I have mounted this on a Japanese Jackson DK2M, and it does the job perfectly, and fitted the smaller diameter hole which you find on Asian produced guitars (as opposed to American)
I have mounted this on a Japanese Jackson DK2M, and it does the job perfectly, and fitted the smaller diameter hole which you find on Asian produced guitars (as opposed to American)
0
0
Zgłoś nadużycie
T
Very poor tolerance
I ordered two of these pots. One measured 468k and the other measured 534k. Next time I will pay a little more and know what values I'm actually getting.
0
0
Zgłoś nadużycie
