Gotoh SD90-SL MG Locking 3L/3R N

177

Clamp Machine Heads Set for Electric Guitar

  • Configuration: 3 left / 3 right
  • Self-clamping due to string tension
  • Smaller string holes on 1st, 2nd and 3rd machine heads improve tuning stability
  • Construction: Half-closed
  • Wing: Perloid Keystone Single Ring
  • Transmission ratio: 1:15
  • Shaft length (to string hole): 20 mm
  • Bore: 8.8 mm
  • Mounting: Screws
  • Screw bracket angle: 90° and 180°
  • Finish: Nickel
  • Includes mounting screws & press-in sleeves
  • Made in Japan
Produkt dostępny od Luty 2009
Numer artykułu 220623
Jednostka sprzedaży 1 szt.
Colour Nickel
277 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

177 Oceny klientów

4.5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

107 Opinie

p
Great tunners for any Gibson style guitar
pabloscotty 13.09.2022
This approach to locking tuners is really great. They looks like Klusons but works like 1M$ :)
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

A
Stylowy wygląd i wygoda
Arek1 30.05.2022
Gitara trzyma strój wiecznie,a niewielkie poprawki nie są problemem,klucze pracują bardzo precyzyjnie.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
X
Almost perfect
Xxlguru 29.07.2020
Pro:
Weight
Functioning
sound
Negatives:
way it looks
Length of the shaft. Might be to short for some headstocks.

They are not heavier than Kluson vintage tuners and do no change the tone. Some heavy locking tuners will ruin the guitars balance and will kill the vibrations of the guitar. This one do not. Guitar stays as it was. Tuning feels good and it is relatively easy to dial in a note. People often ruin their guitars with Vintage tuners with placing heavy modern style tuners. They solve tuning issues and kill guitar sound and make it headstock heavy. This tuners are great option while they eventually do lock and they do stay true to how the guitar tone was with original vintage tuners.

On other side restringing is not as fast as with some other locking tuners. Like with PRS type locking tuners you keep string tension and you lock it down with a screw, Same as with Fender type (Shaller) of tuners only you lock it from the back side. With this tuners you hold a string and you need to turn a tuning peg to lock the string and once you have it tight you can do last half turn to lock it down. So slower string changes and bit awkward. Though once locked it stays locked and tuner works and sounds good, So that is only negative thing about it.
wykończenie
4
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
e
Great upgrade
episg 09.05.2017
Replaced the stock tuners on an Epiphone SG Special with these Gotoh locking tuners and was really impressed by the result. Great quality. The tuning stability has increased significantly, fine tuning is a lot easier and quicker now and restringing is much faster.

(A note for the specific guitar model (Made in Indonesia, Epiphone SG Special 2010): the stock tuners have the mounting screws placed diagonally, so you need to place the new tuners and drill pilot holes for the new mounting screws. Also the peg holes in this guitar are 8mm diameter. The Gotoh bushings that are included are 8.8mm. So, you either need to ream a bit the peg holes or leave the stock bushings.)
wykończenie
4
0
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat