Gravity MS TBA 01

27

Microphone Table Arm

  • Perfect for mounting on tables, tubes, etc.
  • Flexible alignment possible in any position
  • Aluminium construction
  • Microphone holder with a handle that can be rotated in 90° steps
  • Clamping range: 15 - 54 mm
  • Max. load capacity: 1.5 kg
  • An integrated cable guide
  • Weight: 0.96 kg
  • Colour: Black
  • Incl. a black ring set

Note: cable not included in the delivery

Produkt dostępny od Marzec 2022
Numer artykułu 538677
Jednostka sprzedaży 1 szt.
Type Microphone Boom
Colour Black
Weight 1,0 kg
Pokaż więcej
269 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

27 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

wykończenie

20 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
D
A `bit hard to handle
Dylosh 02.10.2023
I like Gravity products (And the invisible force that keeps everything together) I had a desk mic stand which was ordered from Wish. It was a simple clamp/vice design but had springs on the arms to aid the readjustments. This Gravity desktop mic stand seems to be using a bent metal shaft to extend the arms. If clipped on the table and you are trying to change the angle, you are fighting against a great force straight away. I'm not sure if this design is new or the norm and my wish stand was the freak but the ease of having a handy mic stand always attached to my desk is gone that I have to battle against this thing every time I was to higher it up or lower it down.

I'm not giving it a bad review. It seems good and sturdy and very possibly I am not operating it correctly (Even after reading the 1 page instructions)
wykończenie
stabilność
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate fr
Wystąpił błąd. Proszę spróbować później.
T
La grosse claque
Tmkr 01.06.2022
A mon sens le meilleur rapport qualité prix pour un pied de micro. Il arrive après tout le monde, mais il ne déçoit pas.
Les qualités :
- Fabrication et de finition impeccables, un vrai plaisir a manipuler
- Le passe câble qui via un système simple de glissière permet d'utiliser son propre câble XLR
- Les molettes d'ajustement sont souples et permettent de définir la friction permettant ainsi d'ajuster selon le poids du micro
- La tête orientable qui donne encore plus de flexibilité
- Silencieux lors de la manipulation (important pour les gens qui font du stream)

Les moins :
- Je n'ai pas encore trouve

Conclusion : presque de 2 fois moins cher qu'un équivalent chez Rode, il fera autant l'affaire si ce n'est le dépasser et comparer le Gravity par rapport a un truc chinois a ressort bruyant c'est comme comparer Queen aux Musclés.
wykończenie
stabilność
6
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
r
Dümmliche Konstruktion
radicale 29.04.2022
Schon die Verpackung suggeriert ein wertiges Produkt was vielleicht sogar sein Versprechen hält.

Gekauft habe ich diesen Mikrophone Arm weil ich sehr viele Negativ Meinungen zu den Billigen mit der Doppelfeder gelesen habe, dass diese nach einer gewissen Zeit ausleiern.

Auch nach dem Auspacken und der ersten in Augenscheinnahme bestätigt es sich, dass dieser Arm sein Geld wirklich wert ist. Die Konstruktion hat keiner Federn, sondern ein Metallband (ähnlich eines Maßbandes). Außerdem lassen sich die einzelnen Arm Elemente durch Schrauben Fixieren welche sogar Gummiert sind und einen Neongrünen Ring besitzen (Schwarze O-Ringe liegen dem Produkt bei).

Am Arm sind sogar Kabelführungen vorgesehen bis 16 AWG XLR Kabel kein Problem, weiters konnte ich nicht testen da mir 14 und 12 AWG nicht vorliegt. Da die Halterung Flexibel ist kann durchaus auch 14 AWG passen, wobei das schon sehr dicke und schwere Kabel sind.

An meinem Arm kommt ein Kugelkopf + dass Rode SM6 diese Konstruktion wiegt 836g Inkl. Popschutz und Kugelkopf. Die Arm Aufnahme ist 3/8 Zoll ein Adapter liegt nicht mit dabei.

An der 3/8 Zoll Aufnahme sitzt das letzte Gelenk welches eine Besonderheit hat. Zieht man an der Schraube vom Arm weg gibt es eine Feder für eine Konstruktion des Verderbens welche die Position der Aufnahme um 90° dreht.

Hier liegt auch der Schwachpunkt, wie kann man ein so gutes Produkt am ende Verhunzen diese Feder ist nicht belastbar in einer ungünstigen Position macht sich die Federung selbständig. Ein Teures Micro kann schnell schaden nehmen, zum Glück war nur die Spinne befestigt.
wykończenie
stabilność
4
8
Zgłoś nadużycie

Zgłoś nadużycie

Youtube na ten temat