Kovax KCR400 Sel-Adhesive Sandpaper

13

Self-Adhesive Sandpaper

  • Suitable for use with HOSCO H-SB sanding blocks
  • Grit size: 400
  • Width: 64 mm
  • Length: 3.4 m
Produkt dostępny od Styczeń 2021
Numer artykułu 511195
Jednostka sprzedaży 1 szt.
42 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Krótki czas oczekiwania (zazwyczaj 2-5 dni)
Krótki czas oczekiwania (zazwyczaj 2-5 dni)

Produkt został zamówiony i ma być do nas dostarczony w przeciągu kilku dni.

Informacje dotyczące wysyłki
1

13 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

6 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
T
Good quality for wood, NOT for metal!!!!
TrEr 07.06.2021
In Thomann's product description of the corresponding sanding blocks this sandpaper is recommended for fret leveling. Unfortunately this sandpaper is very poor for metal frets. It clogs up and gets dull almost immediately. I also tested it for polishing frets after leveling/crowing with the same poor result. Any decent quality sandpaper from your local hardware store will probably do a better job with frets.

It works great when used on wood though and it's a perfect fit for radius sanding blocks. I've leveled several fretboards using this sandpaper with excellent results.

Recommended for wood/fingerboards. Not recommended for frets.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
i
Fret leveling
io74 13.04.2023
Used it for leveling the frets of a brand new strat that was must have skipped the ordinary quality control for the neck. I decided not to return the guitar just because i loved the finishing and the sound of the pickups. Attached to a sanding block of the appropriate radius, the paper did its job just great.
Of course fret polishing was required after that, but that's another story.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie