Manfrotto 143N Magic Arm

64

Holding Arm

  • With central, locking lever
  • Adapter: 16 mm stud with 1/4" female thread and 16 mm stud with 3/8 female thread
  • Max. load bearing capacity: 3 kg
  • Arm length: 53 cm
  • Weight: 1.07 kg
  • Colour: Black
Produkt dostępny od Lipiec 2011
Numer artykułu 268454
Jednostka sprzedaży 1 szt.
Dostępny B-Stock od 349 zł
399 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

64 Oceny klientów

4.8 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

23 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
S
very practical, but sometimes a little
Stephan7664 18.02.2014
This arm is a very practical accessory for mounting anything form a camera to lights/microphones or even as a camera-handle itself. There is one negative to it, though. The mechanism on my copy sometimes when tightening made a cracking noise, and for some time it wouldn't tighten or loosen up as much as it should, which went away after some time. If I need another one, I will get the manfrotto friction arm, which is more expensive, but I can tighten it with a screw mechanism, and not a springy one like on this.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
MP
Great for lights, not for cameras
Moment Photography 20.05.2021
Much like the Manfrotto 244N Variable Friction Arm, this is a brilliant bit of kit.

However there is a big and important difference between the two, and that is how they tighten.

Firstly (and less importantly), the lever sticks out somewhat and could get in the way.

Secondly, when you tighten this arm to a locked position, the lever jolts and this is a real issue if you are carefully positioning a camera on the arm and trying to get fine tuned framing.

If you only need a strong arm to roughly position something within a few cms then this is fine. Great for lighting, but if you need to be quite precise, you should buy the Manfrotto 244N Variable Friction Arm. In fact I would go as far as to say, just get the friction arm regardless, as I prefer it.

That said, this lever locking arm is also very solid and it will last a lifetime. It's a great piece of kit that is incredibly useful and easy to use.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Clever, but needed a quick repair
Anonimowy 01.08.2014
These arms are very well built and have a clever mechanism that allows you to position whatever is on the end of it easily with one hand, whilst leaving the other free to lock the arm. The arm locks firm and feels like it would handle a good weight before it moved.
One of mine became stuck shortly after purchase. A search revealed that this is a common fault. I had to open up the centre cam and reposition 3 ball bearings that had jumped out of place. Now working A-ok again. I use mine for positioning radio microphone aerials and for this purpose they are perfect.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
The number one "fit-everywhere" boom!
Anonimowy 07.06.2016
It'll let you fit almost every possible item with a microphone thread, to any possible surface, bar, handle,... It's great, nice build quality too
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie