Neutrik NC Stagebox 20 in 4

30

Stagebox 20 In 4 Out

  • Trapeze-shaped Stagebox
  • Cable connection with strain relief and bend protection
  • XLR connectors
  • Empty box with 20 XLR female and 4 XLR REAN male sockets (XLR sockets are crimped without tools)
  • Dimensions (L x W x H): 252 x 134 x 79 mm
  • Labeling strips optionally available (not included)
Produkt dostępny od Styczeń 2006
Numer artykułu 188203
Jednostka sprzedaży 1 szt.
Stagebox Housing (Empty) Yes
19" Rack Compatible No
Inputs 20
Returns 4
415 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

30 Oceny klientów

4.4 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

13 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
O
Good stagebox for the price!
OleksandrB 23.07.2014
I have decided to make a multicore by myself. I have bought Neutrik NC Stagebox 20 in 4 and the sssnake MP24S. For connectors I have bought
NEUTRIK NC3 MXX-B (They are the best for me in every situation).
I was disappointed because multicore wire does not fit to stagebox, It does not fit to this plastic holder before the box and I had to cut some rubber defense from the multicore. After some time of experiments I've finally did the job. If you are not ready to hold the tools in hands than this is not for you!
Next step is to connect wires to stage box. You don't have to weld anything,good, but again you have to work a little to make all things right.
-Easy to use on stage.
-It has no outside XLR stops, only light XLR stops inside, so if you pull wire hardly it will fall of the box probably.
-I've been using it for 6 month and had no problem with connectors.
In Total: Good stagebox but you have to make a lot of work if the wire does not fit to box.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
RF
Only niggles wrong with it... otherwise excellent
Richard F. 40 25.12.2014
This is the second identical Neutrik stagebox I have bought, for a second multicore, the first is still going strong after 5 years.

So what are the niggles the inhibit me giving it an excellent rating?

1/ The cable gland is not very strong/easy to firmly hold the multicore. This meant that after 2-3 years the multicore tended to pull out and needed rewiring and sticking in place. Since we stuck with epoxy it's been absolutely fine. For the second one I will glue with epoxy from the start.

2/ No easy way of fitting a Harting connector. I know Hartings are generally used on the bigger stage boxes but being able to disconnect the stage box protects it a lot.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate es
Wystąpił błąd. Proszę spróbować później.
P
Neutrik NC Stagebox 20 in 4
Pablo106 15.06.2012
Este stageBox es muy facil de conectar, en tan solo 10 minutos puedes tenerlo preparado.Su apertura es muy sencilla y con tan solo un destornillador de estrella y quitar unos 4 tornillos puedes acceder directamente al interior , donde encontraras componentes de calidad con un buen acabado.Es una de las cosas que si cuidas minimamente puede durarte toda la vida.Ademas con el sistema de conexion que incorpora no hace falta soldador ya que solamente pelando el cable e insertandolo en el conector se queda crimpado, ahorrando mucho tiempo y en caso de fallo de conexion poder solucionarlo rapidamente. yo ya tengo dos unidades y si me hiciera falta lo volveria a comprar.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
A
Gutes Stecksystem!
Alexxx 27.08.2011
Die 4er Buchsenpärchen lassen sich als Module aus dem Gehäuse entnehmen und dann einzeln auflegen. Ein Auflegewerkzeug wäre dazu praktisch, ich habe mir mit einem kleinen Messer geholfen und mit dem Klingenrücken die Adern aufgeklemmt. Brächte man auf den Schirm einen Schrumpfschlauch über, ließe er sich bestimmt besser auflegen. Ich habe bisher keine Probleme gehabt die Litze ohne Isolierung aufgelegt zu haben, nutze die Box aber auch nur als Studiocore. Ein wenig Geduld muss man mitbringen um die Module wieder zusammenzustecken, aber die muss man ja so oder so haben wenn man ein Multicore selber baut.

Probleme hatte ich damit, dass das 24-polige Kabel (Cordial CMS) nicht in den Knickschutz und die Durchführung passte. Habe etwas vom Kabelmantel abgeschnitzt und die Durchführung aufgefeilt, dann gings.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie