Rockboard MOD 2 V2 Midi & USB Patchbay

33

MIDI and USB patch-bay

  • All-in-one patch-bay for pedalboards
  • Suitable for MOD slots in RockBoard pedalboards
  • Compatible with a wide range of other pedal boards
  • Acts as a central access point to the effect setup
  • Establishes clear cable routes to and from the pedal board
  • Removable front panel for mounting on or under pedal boards
  • 4x 6.3 mm TRS thru
  • 2x 5-Pin DIN MIDI thru
  • 1x USB Type A thru
  • 1x DC 2.1 x 5.5 mm hollow plug thru
  • 1x AC IEC thru (male front / female rear)
  • All connections mirrored on the rear side
  • Dimensions with front panel (W x D x H): 175 x 85 x 47 mm
  • Dimensions without front panel (W x D x H): 160 x 85 x 33 mm
  • Weight: 420 g
  • Includes mounting screws, lock nuts and TX wrench

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Informacja Zarejestruj swój produkt na www.w-distribution.de/en/Warranty i przedłuż gwarancję na 4 lata.
Produkt dostępny od Sierpień 2019
Numer artykułu 468507
Jednostka sprzedaży 1 szt.
285 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 3.05.
1

33 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

22 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
JK
Excellent for keeping your pedalboard's I/O organized
Jussi K. 28.01.2023
Great for keeping things tidy and organized if you use 4-cable method and require midi-connectivity. I have the Rockboard Quad 4.2 B and this fits right in. I also managed to fit the Truetone 1 Spot Pro CS12 pedal power under the board after some tetris.

A word of warning: Rockboard's angled "flat" midi cables are not a good fit for this patchbay! They are oriented so that the cable will block other inputs. I bought those first but had to change to straight midi cables instead.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Works as it should
MetalJonesy 30.03.2020
Very tidy little device to clear up the clutter on your Rockboard. I recently bought a RockBoard after many years using my own custom made board. I wanted to streamline my effects and moved to an HX stomp in replacement of my drives, delay, reverb, eq, phaser and compressor.

I have been using a 4 cable method for years in the analog domain with a Joyo PXL Pro switcher so already built my own patch box to get rid of cables going everywhere. I could have carried on using it, but the added feature of the IEC through means I can now mount both PSU's and MXR brick under the board with use of an IEC split out Y cable and some IEC to plug socket. It also integrates seamlessly and just makes the whole set up look really professional!
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
M
Awesome patchbay
MD2 28.09.2020
It simplified my pedalboard connections. Looks professional and way better than other patchabays I've looked into.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
Wm
Nice concept...
Woiperdinger music 27.08.2020
Nice concept, but seems like some corners were cut.
On the unit I received, there are a few problems.
1) The TRS jacks are intermittent and I don't think I can trust them in a live situation.
2) the power socket and the midi ports feel very cheap (wiggly/loose) and I doubt they will take more than 50 plug/unplugs
3) DC jack is VERY intermittent, basically un-useable. The slightest touch to the DC cable will cut and reconnect power rapidly
4) There is noticeable "tone suck" from this patchbay.

I really wish I had just built my own patch bay out of higher quality components. I guess I probably will considering the effect the MOD2 has on the sound.

It takes a lot for me to give a negative review... It is too bad, because it looks great and definitely makes stage/rehearsal set up faster.
wykończenie
3
2
Zgłoś nadużycie

Zgłoś nadużycie