Rycote Portable Recorder Suspension

26

Portable Recorder Audio Kit

  • Shock mount for attaching pocket recorders on hot shoe mount
  • Consists of 1x recorder suspension shock mount
  • Suitable for recorder with 1/4" thread
  • RY-041 119
Produkt dostępny od Marzec 2011
Numer artykułu 262533
Jednostka sprzedaży 1 szt.
Component type Pivot Mount
321 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Sobota, 27.04.
1

26 Oceny klientów

4.2 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

17 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
Good suspensions.
PMSFX 18.04.2018
I'm using it with PCM-D100 (I know it has a dedicate suspension, tho I didn't really need another wind muff). PCM D100 is a bit on a heavy side and can tilt it a bit, tho after tightening screws it holds in position really well. Great suspension as expected from Rycote
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
W
More than just portable recorders
WaveSounds 23.10.2023
I’m using this to isolate a stereo bar setup instead of having a rycote mount for both mics, I can use the lower profile standard hard clips and put the stereo bar up on this. I have a zoom f3 up on the stereo bar as well as the mics. The rycote lyres are stiff and good for heavier applications such as this.

The bottom tilt head connects to the bottom plate of the mount via a 1/4 20 (camera tripod) screw. Unfortunately, due to the thickness of the plate, a regular length tripod screw cannot be secured directly to the plate.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
A
Wenn ich nicht müsste ...
Anonimowy 26.11.2015
würd ich die Suspension nicht nutzen, aber es gibt meines Wissens keine Alternative. Nutze die Suspension mit nem Zomm H5 auf Stativ oder Boompole, und grad am Boompole brauchts eine Entkopplung. Das macht die Suspension sehr gut, von daher schinmal Empfehlung. Aber es gibt an der Suspension 3 Schrauben für die Verstellung in drei Achsen:
1. Eine Kreuzschlitzschraube, ein Unding, gleich durch eine Flügelschraube ersetzt, jetz brauchts kein Werkzeug
2. Eine Rändelschraube, im Prinzip gut, leider ist der Gewindeansatz den man in den Boden des H5 schraubt zu Lang: d.h. der Zoom H5 wird nicht ordentlich festgeklemmt un eiert irgendwie auf der Suspension im Kreis, Lösung: 3 Lagen Gaffa aufs H5 und es klemmt gut!
3. Eine Schraube die an ein Zahnrad erinnert, dies baut bei mir keinen richtige Klemmwirkung auf mit der Folge das sich die Suspension gerne mal im Betreib verstellt.
Fazit: Gute Idee, aber teils ganz ordentliche Designfehler.
wykończenie
5
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate fr
Wystąpił błąd. Proszę spróbować później.
k
très bonne suspension
kuzdek 15.10.2011
si vous avez du mal à enregistrer sur votre mini-enregistreur sans avoir sans arrêt des infrabasses dues à des bruits de manipulation, cette suspension est faite pour vous.

elle est très efficace, peu volumineuse, s'adapte sur quasi tous les enregistreurs, et est compatible avec une utilisation poignée ou perche.

très bon produit
wykończenie
4
0
Zgłoś nadużycie

Zgłoś nadużycie