Synergy Friedman BE-DLX

3

Exchangeable All-Tube Pre-Amp Module for Synergy Amplifiers

  • Designed by Dave Friedman himself, the BE-DLX provides both sounds of the popular Synergy Friedman BE and HBE preamp modules in a single unit with more adjustment options
  • BE/HBE Switch per channel,
  • A two position FAT switch lets you add overall low end response
  • The Gain Structure switch to reduce the gain for a classic vintage sound
  • 2 x 12AX7 tubes
  • Two identical channels with Gain, Volume and 3-Band EQ
  • Made in USA
Produkt dostępny od Lipiec 2023
Numer artykułu 570985
Jednostka sprzedaży 1 szt.
Design Desktop
Tube(s) Yes
Amp Modeling No
Effects No
Headphone Output No
Direct Out No
MIDI Interface No
Integrated Expression Pedal No
Connections for Pedals or Switches No
Aux-Input No
Integrated Tuner No
USB-Port No
Drum-Computer No
1 845 zł
darmowa wysyłka, zawiera podatek VAT.
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

3 Oceny klientów

5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

obsługa

właściwości

dźwięk

wykończenie

3 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
TA
Probably the best Synergy module available right now
Tudor Adrian 16.08.2023
Yeap - probably the best one of the bunch.
2 identical channels each with their own BE/HBE and Saturation (aka the Jose mod) switches.
Then, on the inside, it's got a switch to flip the module to Low-Gain or High-Gain mode along with the FAT switch (adds more fullness to the tone - great for single coils). These inside switches though affect both channels so if you flip the FAT switch ON, it'll be on for both the module's channels; same goes for the gain Structure switch. It would have been too good to have the FAT and STRUCT switches available on a per-channel basis as well but the front-plate's already as crammed as it can get so I get why this did not happen.

With the gain STRUCT in Low mode, the BE channel can get REALLY good clean tones with the Gain knob dialed down while cranking the Gain up on the other channel can get you anywhere from Crunch to tight aggressive / percussive metal (no boost needed - enabling the SAT switch adds even more perceived gain and compression).

With the gain STRUCT in High mode, you can get edge of breakup / crunch tones with the Gain pot turned down in BE mode; cranking the Gain up going into HBE mode gives you that wild & articulate British tone Friedman's famous for.

All in all, great module; a lot of available range in just this one preamp.
obsługa
właściwości
dźwięk
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
Z
Better than HBE module
ZeeKay 20.08.2023
More versatile and higher gain than the other Friedman synergy modules. Sounds tighter and bigger but it’s noisy and one needs a noise gate with higher than 1 o’clock gain in HBE setting. The Soldano module is much lower noise, not sure why it’s done this way, maybe the original amps noise floor is different. Great product otherwise.
obsługa
właściwości
dźwięk
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie