Thon 12U Live Rack rail

11

Rack Rail Mounting Set for 12 U Live Rack

  • For self-assembly in Thon Live Rack 12 U
  • 2 Rack rails equipped with nuts and rubber piping
  • Fixing rivets
  • M6x12 rack screws with matching washers
  • Wooden shim plates
Produkt dostępny od Styczeń 2022
Numer artykułu 535190
Jednostka sprzedaży 1 szt.
Rack Rail Yes
99 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

11 Oceny klientów

4.7 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

6 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
w
Good if you're happy to do a little DIY
wriggy_b 13.06.2022
No instructions supplied, which is fine - it's pretty easy to figure out.

The rivets were not the right size for the holes in the rails so I had to redrill. The rivets themselves were very hard to install using the rivet gun that I purchased from thomann in the same order. I don't know if this was the rivet or the gun, but it was pretty hard going!

I was using this kit for a potentially different rack series, so had to cut away some of the extrudate to get it flush (because of other rivets in my existing rack) but it seems to have worked well and is fit for my use.

Lots of bolts, nuts and washers came with the pack, which is welcome.
Knocked off the star for the total because of the need to redrill, but quality is as expected.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
R
Don't buy for flyht racks
RemusD 14.10.2022
Bought this to add rails at the back of my flyht rack. I had to buy a special tool for the rivets, but you can also buy screws if you want to. At first I installed with the given wood distancers, but it won't fit any 19'' rack because it's to narrow. I the removed them and reattached without the distancers and I managed to fit a power strip from thomann, but other rack equipment doesn't fit, the ears don't line up with the rais.

As for quality they are very sturdy and better then the rails provided from flyht cases.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Passt!
Andu1701 18.03.2022
Lässt sich ohne große Probleme installieren, Zubehör ist alles dabei. Funzt!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie