Adam Hall 87222STL U-Rack Panel 2U

299

U - Rack Panel

  • 1.2 mm steel
  • Format: 19 " / 2U
  • Colour: Black
Disponível desde Agosto 2008
número de artigo 214130
unidade de venda 1 peça(s)
Rack Units 2 U
Type 19"
€ 4,90
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Sexta, 26.04.
1

299 Avaliações de clientes

4.9 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

87 Críticas

PS
Ficou perfeito
Paulo Sídnei 12.01.2023
Belo acabamento no meu rack de periféricos.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
K
Thick and strong.
Karmo7 08.03.2020
I made my own I/O panel out of this.
It has i matte black finish, in case you are not a fan of glossy things.
It's made of steel. Strong and sturdy. No dents or defects were caused by drilling the holes. I fitted 24 type-d XLR sockets on this.
acabamento
1
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
I
The right one to fill the empty space..in your rack
I'mTheSoundGuy 23.10.2019
As I stated above, this 2 U panel is the perfect solution when you want to close a gap on you rack. I use it in an IEM/Wireless mics rack where I have 2 units left and it hides the cables inside the rack. Solid construction with no bending because of the 90 degrees dented lower side. Great product!
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
P
Good quality 2U panel and very strong
Pete-plays-guitar 25.04.2017
There is not a lot you can say about a 2U rack panel, but I will have a go.

One major thing (I think is major) is that the end of the strip top and bottom is bent over at 90 degrees with makes this a very stiff and strong panel, especially when combined wit the fact that is it a quite heavy gauge steel it is pressed from. Many rack strips have no bent edge which makes them flex and this starts to make the paint crack, so no problem with this one.

Once fitted int the rack, it is rock solid. I would also have no problems in drilling into this strip for fitting plug sockets etc.

Highly recommended
acabamento
0
0
Reportar a crítica

Reportar a crítica