Neutrik BPX L

50

Grommet

  • For the PX series
  • For large cable diameters
  • Colour: Black
Disponível desde Fevereiro 2009
número de artigo 223460
unidade de venda 1 peça(s)
Colour Black
For Connector-Type PX Series
€ 0,90
IVA incluído, € 20 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Envio previsto até Sexta, 26.04.
1

50 Avaliações de clientes

4.9 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

25 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
NA
Very helpful & necessary!
Nikos As 18.01.2019
This is a very helpful & necessary accessory if you want to make cables with a diameter at 7.00 or 7.50mm. You can combine it with Neutrik connectors such as NP2X, NP3X, NP2X-B, NP3X-B, etc.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
FM
Might make making cables faster and easier
Funeral Musician 23.01.2023
Since the diameter of the cable I had was 7.2 mm, and the maximum cable diameter specified by Neutrik for the NP2RX plugs was 7 mm, I bought a few of these to make making my own cables a little bit easier. I threaded the cable through one of these bushings and, since the hole in them is 8 mm in diameter, there was a gap around the cable, which I did not like. Then, I tried threading the cable through one of the bushings that came with the NP2RX plugs, and, surprisingly, it fit! Putting them on the cable was not easy, but at least there was no gap anymore. If the gap is not a problem either function- or cosmetics-wise, these bushings can make making your own cables faster and easier. Otherwise, I would only recommend these bushings if the diameter of the cable you want to use is the same as the diameter of the hole, which is 8 mm.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
PK
useful article
Piotr Krupa 27.11.2018
It's useful for thick cables with Neutrik jacks
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
L
Neutrik BPX L for thick cables
LeonardS 04.05.2019
If you have a thick cable and want you pluf to be stable this is a must have solution. Don't think twice it is alright.
acabamento
0
0
Reportar a crítica

Reportar a crítica