Fender Player Plus Strat Neck PF

2

Stratocaster neck

  • Neck: Maple
  • Fingerboard: Pau Ferro
  • Fingerboard radius: 305 mm (12")
  • Scale length: 648 mm (25.5")
  • Nut width: 43 mm (1.685")
  • Synthetic bone nut
  • Neck profile: Modern "C" - thickness at 1st fret: 20.82 mm (0.820") / 12th fret: 22.09 mm (0.870")
  • White dot fingerboard inlays
  • 22 Medium jumbo frets
  • 4 Holes for neck mounting
  • Matt urethane finish with glossy urethane finish on the front of the headstock
Produkt dostępny od Maj 2023
Numer artykułu 560821
Jednostka sprzedaży 1 szt.
Model ST-Style
Strings (Number) 6
Material Neck Maple
Material Fingerboard Pau Ferro
Mensur (in mm) 648 mm
Frets / Location (Number) 22
Fretless No
Varnished Yes
1 290 zł
darmowa wysyłka, zawiera podatek VAT.
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Poniedziałek, 29.04.
1

2 Oceny klientów

5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

2 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
J
Great guitar neck, frets may need attention
JSeph 16.11.2023
Honestly these player plus necks are my favourite shape that fender makes, they feel great with the super rolled fretboard edges - I just gel with them really well. Only caveat, while the frets on mine seem fairly level, and the general fit and finish is alright, the fret ends are very much in need of a good polish. The frets themselves are shiny as anything! Frustratingly the ends, while smooth and not sharp, are just a bit coarse by comparison. Still, a great feeling neck. Would also mention that the PF fretboard is very dry out of the box and has some fret dust in the grooves next to the frets, however I plan on cleaning and oiling it anyway as well as staining the fretboard a slightly darker colour so this isn’t much of an issue for me.

Basically, fender quality control being what it is at the moment, expect to have to put some work into these necks if you want them to reach their full potential, but considering you need to at the very least have the nut slots cut anyway, the other issues are easily sorted by a setup.
wykończenie
1
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
EK
Ein Fender-Hals ...
Edwin K. 13.06.2023
... für einen Fender-Korpus. Montiert, passt, hält. Der Sattel muss dann halt noch gefeilt werden. Ist einfach das was es sein soll.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie