Gretsch Rocking Bar Bridge Nickel

65

Bridge for Electric Guitar

  • With ebony base plate
  • Bridge width: 88 mm
  • String spacing: 53 mm
  • Base plate width: 135 mm
  • Base plate depth: 15 mm
  • Finish: Nickel
Produkt dostępny od Marzec 2013
Numer artykułu 306787
Jednostka sprzedaży 1 szt.
Colour Nickel
Design Bridge
Single Rider No
String Holder No
269 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Czwartek, 2.05.
1

65 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

51 Opinie

k
Gretsch Rocking Bar Bridge
kprojer 12.11.2019
Mostek zastosowałem w moim Gretsch 6128T.
Poprawia on znacznie sustain w stosunku do standardowego mostka, który jest montowany fabrycznie.
Struny śpiewnie wybrzmiewają a przy tym wygląda efektownie.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
good product and work fine
Andrew822 12.06.2021
I went full tilt and bought a great roller bridge by ABM for my Peavey Rockingham, that bridge was expensive and a great piece of kit however the low e string kept popping out if I played hard enough, I decided to buy this Gretsch rocking bar to see if it could save my bacon. Well it did cure the problem I described and not only that it even sounds better and Id say a little brighter. I am delighted it cured the problem as I would have sold the guitar if it did not. Regarding intonation OK so you set each e string and that does it but of course some of the string are not correct as its a straight bar but to be honest it is still fine and if it was good enough for Chet its good enough for me. The ABM would work much better with a B5 or B7, this Gretsch Rocking bar is the one for a B6 or B3. Totally happy with it in every way.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
H
Sound is lovely - The fit on a G5125 is tough
Haarlem 08.07.2022
This went on a G5125 (from 2005) replacing an original and rusty Gretsch Adjustomatic.
After installation the bridge appeared to sit too high so I had to remove the adjusting wheels and bring it as low as possible. The action is still quite high though and it needs to lose another 1-1.5 mm. So, I will have to sand the base. Guitar and neck setup are fine btw.
The sound is great, balanced and it has a clean sparkle which was not there before (TV Jones T-armond pickups). I can also hear more harmonics playing acoustically. A bit more sustain is added as well.
Intonation is fine for a set of 10s with plain G.
Only the G string is a bit off (approx +8%) at the 12th fret. Nothing you can really hear though. I assume a wound G would be fine.
Tuning stability is as it was. Didn't see any change for the better when using the Bigsby. Perhaps it has to do with the fact that the bridge sits directly on the wood and not on the wheels so it doesn't rock as it was designed to.
Quality is high. I have the set on Ebony which is quite dark matching the colour of the guitar (black). The chrome is not exactly like the rest of the guitar it looks more like nickel if you ask me. Much more to my liking compared to the chrome parts the guitar came with.
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
JB
Great upgrade!
Joa B 22.03.2021
It is a lot of work to get the saddle to match the body of your guitar, Man ebony is tough...
BUT worth every penny!
The bridge itself is a bit brighter than the original, this is something to be noted and not necessarily a bad thing.
A tip for fitting it properly, put some painters tape on the body and then glue a 60 or 80 grit sandpaper on top of that, higher goes very, very slow....
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie