K&M Twist Grip for Mic Stands

119

Clamping sleeve

  • For mic stands
  • Suitable for 210/2, 201 A / 2, 260/1, 260
  • Colour: Black
Produkt dostępny od Maj 2004
Numer artykułu 170520
Jednostka sprzedaży 1 szt.
Type Grip
fitted for Microphone Stand
7,70 zł
Zawiera podatek VAT, nie zawiera kosztów wysyłki 49 zł
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
Wysyłka spodziewana do dnia Piątek, 26.04.
1

119 Oceny klientów

4.6 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

38 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
r
I'm sure these are fine.
ronhow 09.04.2018
I took gamble that these would fit my Millennium mic stands but they didn't. Nevertheless, the K&M parts are up to their normal high standard ... I think! Thomann told me they wouldn't fit but they looked the same and I didn't listen! Ha ha it was worth a punt as there are no replacement parts for the Millennium mic stands! I also replaced the booms with Millennium ones and they are solid and standing up to the rigours of live stage set up!
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
TS
Doesn't fit
Todd Sloan-Fortune 08.03.2014
I bought this as a bit of a gamble, hoping I could get it to fit on a Millennium MS-2003 microphone stand that I received with a broken twist grip from Thomann (they have replaced it quickly and efficiently). I wasn't expecting it to fit, but I was hoping that it would. It seems like it should be a fairly standard part that is replaceable, but clearly I was mistaken. I have no particular issues with the part, but I can't really be used as a true critic for the item as I haven't managed to get to use it properly.
wykończenie
0
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
S
Toll, dass es das als Ersatzteil gibt
Soul-Café 13.07.2016
Wie in der Überschrift schon steht, bin ich froh, dass es dieses Teil als Ersatzteil gibt. Bei uns im Schulbetrieb ging der kleine "Kunststoffring" irgendwie verloren (keine Ahnung wie aber Schüler haben da wohl einen Spieltrieb und legen alles auseinander und beim Zusammen setzen ist da wohl was verloren gegangen). Dadurch konnte ich einen der Ständer nicht mehr nutzen.
Mit diesem Ersatzteil, der sich leicht einbauen lässt ist der Ständer für wenig Geld wieder voll Funktionsfähig.

Einbau: Drehgriff ganz abschrauben, dünnere Stange ganz rausziehen, evtl. noch Rändelschaube von dünnerer Stange abschrauben, kleinen Kunststoffring auf dünnere Stange mit Verdünnung nach unten aufstecken, dünne Stange in "Standrohr" einführen, Drehgriff von oben wieder festschrauben, evtl. Rändelschraube wieder aufschrauben. fertig. Das hört sich jetzt viel an ist aber in 1-2 Min erledigt.

Das Teil ist auch sinnvoll, wenn de Drehgriff (Feststellgriff) durch zu festes Anziehen bricht.

Der Preis ist dafür ist auch OK.
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie