Behringer NX3000D

59

2-Channel Class-D Amplifier with DSP

  • Power: 2x 900 W at 4 Ωs, 2x 1500 W at 2 Ωs
  • Inputs: 6.3 Mm jack and XLR
  • Outputs: Speaker Twist
  • DSP features: Delay, crossover (3 filter types, slope up to 48 dB/octave), equalizer (8 parametric, 2 dynamic), security settings
  • Format: 19" / 2 RU
  • Case depth: 231 mm
  • Weight: 3.6 kg
K dostání od Září 2018
Číslo produktu 448418
Prodejní jednotka 1 ks
Power (4 Ohms) per Channel 900 W
Channels 2
Rack Units 2 U
Amp Class Class D
2 Ohm stable Yes
DSP/Crossover Yes
Convection cooling No
Width in mm 483 mm
Depth in mm 231 mm
Height in mm 88 mm
Weight 3,6 kg
Bridged Mode 1
Input XLR 1
Jack Input 6,3 sym. 1
Parallel Input 1
Link Out No
Output Speaker Twist 1
Zobrazit víc
11 222 Kč
Všechny ceny vč. DPH
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Dodávku bez poštovného můžete očekávat pravděpodobně mezi Čtvrtek, 2.05. a Pátek, 3.05.
1

59 Hodnocení zákazníků

4.5 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Ovládání

Vlastnosti

Zvuk

Zpracování

44 Recenze

x
Velmi hlucny ventilator i bez zateze
xmiska 27.11.2018
Pro:
DSP se vsemi potrebnymi funkcemi
Za tu cenu slusny vykon
Velmi lehky
Mala instalacni hlouka
Proti:
Velmi hlucny i bez zateze

Koupil jsem tento zesilovac pro instalaci do racku na podiu v divadle,
bohuzel hned po prvnim zapnuti mi bylo jasne, ze jej budu muset vratit kvuli jeho hluku. I bez jakekoliv pripojene zateze jede ventilator hned snad naplno. Nevim, zda jde o vlastnost produktu nebo o vadu konkretniho kusu. Pro srovnani, napr o zesilovaci CROWN o stejnem vykonu ani nevite, ze je zapnuty.
Dokazu si ho predstavit pro pouziti v instalaci, kde bude umisten v uzavrene mistnosti a nebude tedy vadit jeho hluk nebo pro mobilni pouziti venku.
Ovládání
Vlastnosti
Zvuk
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

ČH
Český Honzík 19.02.2019
Pou¸ívám tento zesilova? na satelity B&C speakers, výsledný zvuk spl?uje moje po¸adavky.Mohu doporu?it.
Ovládání
Vlastnosti
Zvuk
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
UB
Lightweight in Kg, Heavyweight in Sound Quality
UK Beachboys 24.05.2020
I've never paid attention to the negative press Behringer used to receive and simply made my own mind up. I have 2 X X32, lots of P16 mixers so when I needed some amps for a new system I spotted these. Initially the draw was the weight, but then I noticed the digital version, and for the small increase in cost went with a couple of these - blind. My intention was to do the crossover in the X32, but once I had them in the rack, I tried the laptop programming of the crossover functions and decided that this would make the rack more versatile for multiple uses, so I just feed these amps with a L+R and leave them to do the crossover functions. Works perfectly. I'm never careful with equipment - my use of every product is heavy handed and I often break 'rules' and these appear quite happy to accept accidental no load, or simple power up by just turning on. They just work. No excessive temperatures, no annoying features. The fans are quite loud, if that's an issue, and I wish they had the choice of XLR and jack, as in some of the Thomann own brands - as you can use these for loopthroughs. On these amps I had to make up cables to do this, but it's a small point. The absolutely best feature of course is the weight - as in they weigh so little. I have a Thomann 2400 amp in the same rack. It weighs more than the two Behringers combined, plus some! The LCD screens on the front are quite narrow angle, so reading them from above or the sides can be tricky - you need to be face on to really see the detail - if like me you wear varifocal glasses, it's difficult to read without squatting down, but that's a minor point. I'll certainly buy more of these.
Ovládání
Vlastnosti
Zvuk
Zpracování
2
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
T
Perfect for bass transducers on my simulator rig.
Twinny 31.03.2020
Using this to drive 2x Buttkicker LFE's on my simulator. I returned a recently purchased NU1000D that I purchased from another online retailer as this was just released within the return window for not much more money.

The amp has plenty of overhead if you're not driving the LFE's at their max and this DSP version has loads of features to make sure you can get the best sound out of your setup without fear of not having enough power or damaging your equipment. Specifically bought the DSP version as the built in filters and crossovers mean I can have the granularity I need to control the audio being pushed to the transducers, which is essential when they are being used to replicate specific effects in racing or flying simulators.

Only two downsides which are more of an unfortunate design choice then an actua downside, doesn't really detract from the value:

1. Some of the DSP features are only useable through the USB interface meaning you have to have a computer connected to it for really fine tuning. You can save the patches and recall them without the PC after you have made them. Onboard menu is perfectly funtional but better off using the software when setting it up.

2. The fans are LOUD. No change here from the previous model. This is the only reason I knocked a star off quality because this thing looks and sounds great otherwise.

Will be picking up a few more of these as I acquire more transducers.
Ovládání
Vlastnosti
Zvuk
Zpracování
4
0
Ohlásit hodnocení

Ohlásit hodnocení