Göldo 500K log Mini Pot

331

Pot for Electric Guitar or Bass

  • Manufacturer designation: E500M
  • Small size
  • Housing diameter: 16.5 mm
  • Resistance: 500 kOhm
  • Resistance curve: logarithmic
  • Axle: coarsely fluted slotted axle (18 teeth for imported guitars & potentiometer knobs)
  • Thread diameter: 8 mm
  • Thread length: 10 mm
K dostání od Duben 2006
Číslo produktu 192488
Prodejní jednotka 1 ks
Design Tone
Resistance Value 500 kOhms
Characteristic Curve Logarithmic
Thread Length 10,0 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type grooved
72 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Množstevní sleva
Cena za kus Ušetříte Množství
72 Kč 1
69 Kč 4,2% 4
66 Kč 8,3% 8
63 Kč 12,5% 12
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Dodání přibližně v rozmezí Čtvrtek, 16.05.Pátek, 17.05.
1

331 Hodnocení zákazníků

4.6 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Zpracování

102 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
S
Don't let the low price put you off
Sinest 12.09.2020
I used these on a Aria Pro II L5 style hollowbody guitar, to replace the old scratchy pots , 1 of which was completely dead so I had no sound on the neck pickup.
I wanted full size pots, but they did not fit on that particular guitar because of the small F-holes.
On the multimeter they measured from 485K to 530K which I think is great. I've seen CTS pots that are way worse off spec than these.
The taper also is nice and gradual.
They dont feel too loose like CTS but neither too stiff and slow to turn like Alphas. Just make sure you don't cook them with the soldering gun, then the soft feeling will go away and the pot might be ruined completely.
The shaft, axle and nuts could be made out of brass or something more sturdy, but they work fine anyway, just do not overtighten them.
For metric-mini-pots, that is my choice and I recommend them.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
P
Alright
Perwanie 01.05.2018
So these potmeters are good, easly to place and work smoothly.


Pros:
Cheap
Quality
Smooth running
Clear tone
Easy to assemble
Nice grip

Cons
The tone compared to fender pots are not as deep, but on the listening ear theres not too much difirence.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
D
Nice mini pot
DominikZ 17.08.2015
The operation is very smooth and slightly on the light side (which some will like and some won't). There is no unwanted noise from operation out of the box, but we'll see how it will hold up in the long run. It is a small body size pot, so it will fit in tighter spaces than a larger size pot. All in all, you can't really expect much more from a potentiometer :)
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
A
Pots for my Hohner
Anonymní 29.12.2014
I use this pot for my Hohner G2T. The electronics pocket is quite small so i choose the small pot shape. I replaced the original tone and volume pot with it. The pot is very easy to solder, both the contacts and the back of the pot. The pot works fine and is adjusted with a smooth feel. It does not produce any crackle sounds. It appears to be sturdy so i hope it has a good long term durability. I was more or less expecting the small pot shape not to produce enough friction whilst being turned due to the small face but it works just as fine as a big one.
Zpracování
0
1
Ohlásit hodnocení

Ohlásit hodnocení