Kovax KCR400 Sel-Adhesive Sandpaper

13

Self-Adhesive Sandpaper

  • Suitable for use with HOSCO H-SB sanding blocks
  • Grit size: 400
  • Width: 64 mm
  • Length: 3.4 m
K dostání od Leden 2021
Číslo produktu 511195
Prodejní jednotka 1 ks
248 Kč
Cena vč. DPH nezahrnuje poštovné 295 Kč
Na skladě
Na skladě

Tento produkt je na skladě a může být obratem odeslán.

Informace o expedici
Dodání přibližně v rozmezí Středa, 15.05.Čtvrtek, 16.05.
1

13 Hodnocení zákazníků

4.6 / 5

Musíte být přihlášeni, pokud chcete hodnotit produkty.

Upozornění: Abychom zabránili tomu, že se budou hodnocení zakládat informacích z doslechu, polovičních pravdách nebo skryté reklamě, dovolujeme na našich stránkách hodnotit pouze skutečným uživatelům, kteří u nás vybavení také koupili.

Po přihlášení najdete také v zákaznickém centru v sekci "Hodnotit produkty" všechny produkty, které můžete hodnotit.

Zpracování

6 Recenze

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
T
Good quality for wood, NOT for metal!!!!
TrEr 07.06.2021
In Thomann's product description of the corresponding sanding blocks this sandpaper is recommended for fret leveling. Unfortunately this sandpaper is very poor for metal frets. It clogs up and gets dull almost immediately. I also tested it for polishing frets after leveling/crowing with the same poor result. Any decent quality sandpaper from your local hardware store will probably do a better job with frets.

It works great when used on wood though and it's a perfect fit for radius sanding blocks. I've leveled several fretboards using this sandpaper with excellent results.

Recommended for wood/fingerboards. Not recommended for frets.
Zpracování
1
0
Ohlásit hodnocení

Ohlásit hodnocení

google translate gb
Bohužel se vyskyla chyba. Zopakujte protím tuto akci později.
i
Fret leveling
io74 13.04.2023
Used it for leveling the frets of a brand new strat that was must have skipped the ordinary quality control for the neck. I decided not to return the guitar just because i loved the finishing and the sound of the pickups. Attached to a sanding block of the appropriate radius, the paper did its job just great.
Of course fret polishing was required after that, but that's another story.
Zpracování
0
0
Ohlásit hodnocení

Ohlásit hodnocení